Gateway » P Series » P-6831

Gateway » P Series » P-6831 LCD Screen Replacement Guide

How to Remove Replace Install your Gateway P Series P-6831 Laptop LCD Screen

1. Remove the rubber covers from you Gateway P-6831 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway P-6831 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway P-6831 LCD hinges with care as they are delicate.

6. Place the Gateway P-6831 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway P-6831 Inverter from the LCD.

8. You are now ready to replace and install your new Gateway P-6831 LCD Screen.

9. Recconnect back your Gateway P-6831 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.